Home /
Kanger Dripbox 2 Kit

Kanger Dripbox 2 Kit

Email to a Friend

$39.90 $49.90

Weight: 0.3600 KG

Quick Overview

1. With temperature control and high power output
2. Replaceable Drip Coil
3. Support Both MTL and DL inhale

Product Details

Product Tags

Customer reviews

Kanger DRIPBOX™ 2 Manual

About Kanger DRIPBOX 2 Kit

Kanger DRIPBOX 2 Kit comes with Subdrip and Dripbox 2, Dripbox 2 integrated battery and tank with capacity of 7.0mL. User can easily squeeze the tank and pump moderate juice from the Dripbox 2 to Subdrip. With temperature control and high power output, user can enjoy the fun of dripping. In additional, replaceable drip coil makes the coil changing much easier. Kanger Dripbox 2 Features

Parameter for Subdrip

Height:	26mm
Diameter:	22mm
Weight:	30g
Material:	Stainless steel
Connection:	510 thread with juice delivery mechanism
Coil:	RBA 0.3 Ohm (2 * 0.6 Ohm in parallel) Drip coil 0.2 Ohm Kanthal replaceable coil
Support both MTL and DL inhale
Adjustable air flow

Parameter for Dripbox 2

Height:	84mm
Length:	57mm
Width:	23mm
Weight:	227g (exclude 18650 cell)
Material:	Zinc alloy
Color:	Black/ White/ Silver
Juice capacity:	7mL
Display:	OLED
Cell:	replaceable Li 18650 cell X 1 (discharge 30A ablove)
Charging:	Micro USB port, DC 5V / 1000 mAh
Power output:	5-80W
Resistance wire:	0.1 - 2.5 Ohm
TC range:	100℃ to 315℃ or 200℉ to 600℉
Tank connection:	510 thread

Important

Subdrip must use together with Dripbox 2 or Dripmod battery since it has the juice delivery channel, using other types of mod may cause the juice flows down to the battery and ruin your mod.

Function

A. Replacement Coil installation
B. DIY Coil
C. Juice filling and feeding to Subdrip
D. Installing Subdrip to Dripmod

Dripbox 2 Protection

1. Short circuit protection, LCD flashes and displays "Low ATOMIZER" or "ATOMIZER SHORT"
2. Atomizer open circuit, LCD flashed and displays "Check Atomizer"
3. Cell reverse protection, no power output when cell reversely installed.
4. PCB over temperature protection, and battery stops functioning and LCD displays "TEMP HIGH".
5. 10 seconds over use usage protection, no power output and LCD displays "TIME OUT". Vaping time can setting in 3-20s through program settings.
6. Cell capacity protection, when cell capacity is too low, and displays "Check Battery" or "LOW POWER".

Firmware

1. Download the driver software.
2. Connect your device to your PC. The Driver will detect your device automatically.
3. Enter function interface, you can customize the coefficient that best fits you.
4. If it failed during the updating progress please reconnect your device to PC.
Note:
M1-M5 / TC needs to adjust by software on PC
M1-M5: Reset can change resistance temperature, vaping time.
TC: Adjust the resistance coefficient. Kanger Dripbox 2 Package